Attaching your Lutea™ Loop

The Lutea™ Loop is an optional accessory that can improve contact with the head and Lutea™. You can order a Loop on our website at www.samphireneuro.com. To attach your Loop follow the steps below.

1. Align the Loop with your Lutea™

Make sure the S on your Loop (labelled 1 in the image above) is the same side as the S on your Lutea™.

2. Attach the Loop

Hook the S-side Loop arm onto your Lutea™ and push down to ensure it is firmly in place (labelled 2 in the first image). Hook the blank arm onto the other side of your Lutea™ and again push down to ensure it is firmly in place.

3. Place Lutea™ on your head

Position your Lutea™ as normal on the top of your head with the elastic Loop strap at the back of your head - near your neck. If you have long hair, it might help to tie it up or pull it through so that the elastic Loop strap is underneath.

4. Adjust the strap

Slide the plastic buckle (labelled 3 in the first image) on the elastic Loop strap to tighten or loosen. Your Lutea™ should fit tightly to the head but not be uncomfortable to wear.

5. Run your session

After running your Lutea™ session, detach the Loop to ensure easy cleaning and drying.